Example 16-1 shows the installation and configuration of the PMDF-XGS transport bridge component on the OS/2 system known as bridge.acme.com (at the TCP/IP level from the PMDF side) and PMDF (as a pseudo-SNADS node from the SNADS side) at the acme.com site pictured in Figure 18-1 .
Example 16-2 shows a similar installation and configuration on an NT
PMDF-XGS transport bridge system. The example assumes that the CD-ROM
drive is drive D:.
Remember that the values entered in this sample are for purposes of example only. Be sure to use the values appropriate for your system when you perform the actual configuration.
Example 16-1 Example PMDF-XGS V6.0 OS/2 transport bridge installation andconfiguration on
[D:\other\os2\xgs]install.cmd PMDF / SNADS server installation Where do you want the code installed [C:\XGS]? C:\XGS [D:\other\os2\xgs]xcopy *.* c:\xgs Source files are being read... D:\other\os2\xgs\aestr32.dll D:\other\os2\xgs\appcfns.dll D:\other\os2\xgs\config.cmd D:\other\os2\xgs\cpicapc.dll D:\other\os2\xgs\diaprf32.dll D:\other\os2\xgs\gds32.dll D:\other\os2\xgs\install.cmd D:\other\os2\xgs\readme D:\other\os2\xgs\recvsrv.exe D:\other\os2\xgs\sendsrv.exe D:\other\os2\xgs\xcontrol.exe 11 file(s) copied. [D:\other\os2\xgs\]c: [D:\other\os2\xgs\]cd c:\xgs PMDF / SNADS server configuration tool configuring control element The active components need to introduce themselves to the SNMP control process on some TCP/IP port. What port is to be used [9990]? 9990 The control process needs an SNMP community name to register the Gateway MIB. What community name is going to be used [public]? public One or more SNADS receive processes may be configured How many receive processes should be run [1]? 1 The receive processes need to connect to the PMDF MTA What is the TCP/IP hostname of the machine running PMDF? roadrnnr.acme.com What port is the SNADS receive process on the PMDF machine listening on Port number [9993]? 9993 What is the SNADS name of the Gateway? PMDF What is the maximum document size to be accepted by the Gateway [10000000]? 10000 000 What is the TCP/IP host name of the syslog host [localhost]? localhost What directory is to be used to store captured SNADS distributions [.\capture]? .\capture There may be several SNADS send processes. Each listens on a separate port and is typically used to send to a different SNADS node. What port number should the first SNADS send process use [9994]? 9994 What port number should the next SNADS send process use? (press enter to end) make sure that c:\xgs is added to the LIBPATH path in config.sys [C:\other\os2\xgs]
Example 16-2 Example PMDF-XGS V6.0 NT transport bridge installation andconfiguration
C:\>md xgs
C:\>cd xgs
C:\xgs>copy D:\other\nt-intel\xgs\*.*
3 file(s) copied
C:\xgs>config.bat
PMDF / SNADS server configuration tool
One or more SNADS receive processes may be configured
How many receive processes should be run [1]? 1
The receive processes need to connect to the PMDF MTA
What is the TCP/IP hostname of the machine running PMDF? roadrnnr.acme.com
What port is the SNADS receive process on the PMDF machine listening on
Port number [9993]? 9993
What is the SNADS name of the Gateway? PMDF
What is the maximum document size to be accepted by the Gateway
[10000000]? 10000000
What is the TCP/IP host name of the syslog host []? localhost
There may be several SNADS send processes. Each listens on a separate port
and is typically used to send to a different SNADS node.
Only one is needed. Just press enter to finish the list
What port number should the first SNADS send process use [9994]? 9994
What port number should the next SNADS send process use? ENTER
C:\xgs>