In order to use the web-based interface for setting up mail filters, you must have a web client and TCP/IP access to the PMDF system. Your messages must also be delivered to the VMS MAIL message store on the PMDF system, or to a PMDF popstore or PMDF MessageStore account on the PMDF system.
The web form will ask you for your e-mail address and your password; you will need to provide this information in order to set up or change your mailbox filter.
To connect to the interface with your web browser, you would normally open the URL
http://host:7633/mailbox_filters/In place of
host, use the actual IP host name of
the system running PMDF, on which your messages are delivered. Your
system administrator may have chosen to configure the mailbox filtering
port to be a port other than 7633; if so, then you will need to specify
that other port number in place of 7633 in the above URL.
Check with your system administrator if you are not sure of the exact
URL to use.
Once connected to the introductory web page, links to help and various mailbox filtering activities may be followed.