Example 20-1 shows the installation and configuration of the PMDF-XGS transport bridge component on the OS/2 system known as bridge.example.com (at the TCP/IP level from the PMDF side) and PMDF (as a pseudo-SNADS node from the SNADS side) at the example.com site pictured in Figure 22-1. The example assumes that the CD-ROM drive is drive D:.

Example 20-2 shows a similar installation and configuration on an NT PMDF-XGS transport bridge system. The example assumes that the CD-ROM drive is drive D:.

Remember that the values in this sample are for purposes of example only. Be sure to use the values appropriate for your system when you perform the actual configuration.

Example 20-1 Example PMDF-XGS OS/2 Transport Bridge Installation and Configuration

[D:\other\os2\xgs]install.cmd PMDF / SNADS server installation Where do you want the code installed [C:\XGS]? C:\XGS [D:\other\os2\xgs]xcopy *.* c:\xgs Source files are being read... D:\other\os2\xgs\aestr32.dll D:\other\os2\xgs\appcfns.dll D:\other\os2\xgs\config.cmd D:\other\os2\xgs\cpicapc.dll D:\other\os2\xgs\diaprf32.dll D:\other\os2\xgs\gds32.dll D:\other\os2\xgs\install.cmd D:\other\os2\xgs\readme D:\other\os2\xgs\recvsrv.exe D:\other\os2\xgs\sendsrv.exe D:\other\os2\xgs\xcontrol.exe 11 file(s) copied. [D:\other\os2\xgs\]c: [D:\other\os2\xgs\]cd c:\xgs PMDF / SNADS server configuration tool configuring control element The active components need to introduce themselves to the SNMP control process on some TCP/IP port. What port is to be used [9990]? 9990 The control process needs an SNMP community name to register the Gateway MIB. What community name is going to be used [public]? public One or more SNADS receive processes may be configured How many receive processes should be run [1]? 1 The receive processes need to connect to the PMDF MTA What is the TCP/IP hostname of the machine running PMDF? naples.example.com What port is the SNADS receive process on the PMDF machine listening on Port number [9993]? 9993 What is the SNADS name of the Gateway? PMDF What is the maximum document size to be accepted by the Gateway [10000000]? 10000 000 What is the TCP/IP host name of the syslog host [localhost]? localhost What directory is to be used to store captured SNADS distributions [.\capture]? .\capture There may be several SNADS send processes. Each listens on a separate port and is typically used to send to a different SNADS node. What port number should the first SNADS send process use [9994]? 9994 What port number should the next SNADS send process use? (press enter to end) make sure that c:\xgs is added to the LIBPATH path in config.sys [C:\other\os2\xgs]

Example 20-2 Example PMDF-XGS NT Transport Bridge Installation and Configuration

C:\>md xgs C:\>cd xgs C:\xgs>copy D:\other\nt-intel\xgs\*.* 3 file(s) copied C:\xgs>config.bat PMDF / SNADS server configuration tool One or more SNADS receive processes may be configured How many receive processes should be run [1]? 1 The receive processes need to connect to the PMDF MTA What is the TCP/IP hostname of the machine running PMDF? naples.example.com What port is the SNADS receive process on the PMDF machine listening on Port number [9993]? 9993 What is the SNADS name of the Gateway? PMDF What is the maximum document size to be accepted by the Gateway [10000000]? 10000000 What is the TCP/IP host name of the syslog host []? localhost There may be several SNADS send processes. Each listens on a separate port and is typically used to send to a different SNADS node. Only one is needed. Just press enter to finish the list What port number should the first SNADS send process use [9994]? 9994 What port number should the next SNADS send process use? [ENTER] C:\xgs>